TUNNEL AFTER MH30  MH25 lining 82611i.JP


Our line of specialty products provide a full system solution for the repair and protection of wastewater structures. Products that seal against infiltration, exfiltration & corrosion with a 10 to 50 year design life for both brick and concrete wastewater structures.

2019 DuraSeal PM out.jpg

DuraSeal PM is a single component, microsilica enhanced, fiber reinforced, shrinkage compensated, high strength repair mortar, designed specifically for the rehabilitation of both brick and concrete wastewater structures.

Click the PDF below for more product information.

DuraSeal CA is a single component, pure fused calcium aluminate cement, fiber reinforced, shrinkage compensated, high strength repair mortar, designed specifically for superior corrosion protection of both brick and concrete wastewater structures.

Click the PDF below for more product information.

2019 DuraSeal CA out.jpg

DuraSeal RM is a high early compressive strength repair mortar featuring a rapid set time, designed specifically for the rehabilitation of both brick and concrete wastewater structures.

Click the PDF below for more product information.

2019 DuraSeal RM out.jpg
2019 DuraCast IP logo out.jpg

DuraCast IP is a single component,
microsilica enhanced, fiber reinforced, shrinkage compensated,

high strength repair mortar, designed specifically for the rehabilitation
of underground pipelines and structures.

DuraSeal Plug Bucket.jpg
2019 DuraSeal Plug out.jpg

DuraSeal Plug is a single component blend of select cements and admixtures designed specifically for infiltration control of both brick and concrete wastewater structures.

2019 DuraFlex HBD logo out.jpg

DuraFlex HBD is a very unique, two-component, 100% solids urethane-novolac hybrid epoxy coating system. DuraFlex HBD is a high-build, self-leveling coating system designed with a very high flexural modulus. Excellent bond to concrete, steel, and wood. DuraFlex HBD is easy to apply; conveniently applied in a 1:1 mix ratio by volume. DuraFlex HBD is a “green” product, 100% solids and environmentally friendly. DuraFlex HBD is designed specifically to protect and outperform in various aggressive environments, including immersion, which are subject to movement, corrosion, microbial and chemical attack, infiltration, vibration and

impact, while being tolerant to high levels of moisture and humidity during application. 

DuraFlex HBD is a urethane-novolac hybrid

epoxy coating with enhanced chemical resistance and crosslinking. It possesses the superior adhesion, tolerance and strength of

an epoxy, combined with the flexibility (38% elongation), gloss, UV tolerance, and impact resistance of a urethanecombined as one technology. Because DuraFlex HBD can be 

applied by brush, roller, or spray; it provides applicators tremendous usability options and

ease of application. It is self-priming and it ties back into itself indefinitely.

DuraFlex HBD Bucket.jpg
DuraLine Bucket.jpg

DuraLine is a fiber reinforced polymer epoxy. It is two-component, 100% solids,
high build, spray-applied, structural grade epoxy system. The material can be hand troweled or spray applied up to 1/4” (250 mils) per pass. DuraLine when cured exhibits high strength and flexural properties for partially or fully deteriorated structures.

2019 DuraLine logo out.jpg
DuraFlex Bucket.jpg
2019 DuraFlex logo out.jpg

DuraFlex is an effective for sealing the grade adjustment ring area and joint sections in a manhole or catch basin from the inside of the structure. It’s formulation is a 100% acrylate. Once cured, the material is categorized as a hybrid flexible elastomer. Exhibiting high tensile elongation.

The properties of traditional urethanes without the is ocyanates and with the industry’s best shelf life. Used to restore manholes with an effective seal at the manhole chimney ring joint, and other joint areas in order to seal I&I.

Click the PDF below for more product information.

DuraClad bucket copy.jpg
2020 DuraClad logo out.jpg

The simplicity of a cementitious liner with the performance of a high-build epoxy system all in one product for the first time.


High chemical resistance1 and
anti-microbial performance2 to combat H2S, with high density cross-linking of epoxy for barrier sealing of I&I.


DuraClad for use in wet, humid conditions typically found in manhole environments. Formulated to bring the manhole rehab and lining industry a cost-effective, simplistic yet high performance method to restore and line manholes with the familiarity of cements, but cured with the benefits of high build epoxies.


DuraClad can be effectively used as a resurfacer and liner in a single, simple application.


DuraClad provides surface tolerance and forgiveness, while allowing for simplicity in applications without performance.

Click the PDF below for more product information.